Skip to main content

Slashdot: Qualcomm Doubles 5G mmWave Range To 2.36 Miles For Broadband Modems

Qualcomm Doubles 5G mmWave Range To 2.36 Miles For Broadband Modems
Published on September 01, 2020 at 04:50AM
As 5G networks have continued to spread across the world, the biggest issue with ultra-fast millimeter wave (mmWave) towers has been their short transmission distance, which is generally measured in city blocks rather than miles. Today, Qualcomm announced a breakthrough in mmWave transmission range, successfully achieving a 5G data connection over a 3.8-kilometer (2.36-mile) distance -- over twice the range originally promised by its long-range QTM527 antenna system last year. VentureBeat reports: It's important to put today's news into perspective, as the record is specific to broadband modems rather than smartphones. Qualcomm is touting the achievement as evidence of mmWave's viability as a fixed wireless access solution, enabling carriers to offer fiber-speed 5G coverage in rural, suburban, and urban communities that might have had poor wired home broadband options in the past. The successful test was conducted in Regional Victoria, Australia, presumably with minimal physical interference between the sending and receiving devices. The test relied on two existing Qualcomm hardware solutions -- the Snapdragon X55 modem and QTM527 antenna -- inside a consumer premises equipment broadband modem, communicating with Ericsson's Air5121 and Baseband 6630 tower hardware, enhanced by extended-range software. No details were provided on speeds or other details of the connection, but Qualcomm characterized the successful range test as "the first step in utilizing mmWave for an extended-range 5G data transfer," hinting that there may have been compromises in speed or other areas. The company previously noted that carriers would be able to deliver up to 7Gbps download speeds if the QTM527 could access a full 800MHz of mmWave spectrum. Existing tower hardware has hit 4.3Gbps for a single device or 8.5Gbps for two devices.

Read more of this story at Slashdot.

Comments

Popular posts from this blog

Slashdot: AT&T Says Leaked Data of 70 Million People Is Not From Its Systems

AT&T Says Leaked Data of 70 Million People Is Not From Its Systems Published on March 20, 2024 at 02:15AM An anonymous reader quotes a report from BleepingComputer: AT&T says a massive trove of data impacting 71 million people did not originate from its systems after a hacker leaked it on a cybercrime forum and claimed it was stolen in a 2021 breach of the company. While BleepingComputer has not been able to confirm the legitimacy of all the data in the database, we have confirmed some of the entries are accurate, including those whose data is not publicly accessible for scraping. The data is from an alleged 2021 AT&T data breach that a threat actor known as ShinyHunters attempted to sell on the RaidForums data theft forum for a starting price of $200,000 and incremental offers of $30,000. The hacker stated they would sell it immediately for $1 million. AT&T told BleepingComputer then that the data did not originate from them and that its systems were not breached. &q

Slashdot: AT&T, T-Mobile Prep First RedCap 5G IoT Devices

AT&T, T-Mobile Prep First RedCap 5G IoT Devices Published on October 15, 2024 at 03:20AM The first 5G Internet of Things (IoT) devices are launching soon. According to Fierce Wireless, T-Mobile plans to launch its first RedCap devices by the end of the year, while AT&T's devices are expected sometime in 2025. From the report: All of this should pave the way for higher performance 5G gadgets to make an impact in the world of IoT. RedCap, which stands for reduced capabilities, was introduced as part of the 3GPP's Release 17 5G standard, which was completed -- or frozen in 3GPP terms -- in mid-2022. The specification, which is also called NR-Light, is the first 5G-specific spec for IoT. RedCap promises to offer data transfer speeds of between 30 Mbps to 80 Mbps. The RedCap spec greatly reduces the bandwidth needed for 5G, allowing the signal to run in a 20 MHz channel rather than the 100 MHz channel required for full scale 5G communications. Read more of this story at

Slashdot: AT&T Can't Hang Up On Landline Phone Customers, California Agency Rules

AT&T Can't Hang Up On Landline Phone Customers, California Agency Rules Published on June 22, 2024 at 01:50AM An anonymous reader quotes a report from Ars Technica: The California Public Utilities Commission (CPUC) yesterday rejected AT&T's request to end its landline phone obligations. The state agency also urged AT&T to upgrade copper facilities to fiber instead of trying to shut down the outdated portions of its network. AT&T asked the state to eliminate its Carrier of Last Resort (COLR) obligation, which requires it to provide landline telephone service to any potential customer in its service territory. A CPUC administrative law judge recommended rejection of the application last month, and the commission voted to dismiss AT&T's application with prejudice on Thursday. "Our vote to dismiss AT&T's application made clear that we will protect customer access to basic telephone service... Our rules were designed to provide that assurance,